Control system fing tak a ni
Hnathawh bulpui tangkai tak tak
10.4-inch TFT true rawng touch screen a ni
Mold parameter set 1000 dah theihna a ni
Chinese input leh mold information lakchhuahna a support.
Multi-curve hmanga entir theihna function
Millisecond-level real-time-a motion leh temperature data tam tak capture, dual-vernier data analysis, curve scaling, leh multi-modal data overlay leh comparison te a thlawp a ni.
Mahni-intelligent control function siam chhuah a ni
Smart Storage a ni
Lubrication fing tak hmanga siam a ni
Energy hman dan fing tak
Fault Point hriatchhuahna fing tak
Thianghlim taka Enkawlna
Temperature Control fing tak a ni
Thianghlim taka Ejection
Thianghlim taka Retraction
Glue Leakage hriat theihna fing tak
Auxiliary Machine inzawmkhawmna fing tak
Customer te digital leh intelligent mamawh phuhruk
Model zawng zawng hi MES interface neiin standard-in an rawn thleng vek a ni.
OPC-UA, MQTT, leh MODBUS protocol te a support.
Communication interface hman tlanglawn tak tak: RS-485, USB, CANOPEN, leh EtherCAT te a support.
Hydraulic system hmanga siam a ni
Hydraulic control system hmanga chakna sang-precision energy-saving
Electric injection molding machine control platform-ah a innghat a ni
23-bit absolute encoder technology hmanga siam a ni
Servo motors te hian performance sang-performance, sang{1}}response, low-inertia nei te an ni
15%-20% in dikna tihchangtlun a ni
High-precision closed-loop mold hawn leh khar proportional valve
Optimized control algorithms hian mold opening repeatability accuracy ±0.1mm a nei a, chu chuan mold hawn leh khar action stable zawk, rang zawk, leh shock-free zawk a siam a, chu chuan robotic arm-a object handling dikna leh stability a ti tha zawk a ni.
CLAMPING UNIT AH KAN LO AWM VE ANG
Mold lu plate a ni
Central compression mold structure hian head plate lairil lam hawia inzar pharh reinforcing rib tam tak hmangin mold chu rintlak takin a vawng tlat a, chu chuan central deformation tlemte chauh a thlen a ni.
Mold-locking plate a ni
Box-type center compression molding structure hian plate pahnih rigidity a ti sang a ni. Deformation hi 10%-15% in a tlahniam a, hei hian thil siam zawh tawha flash awm theihna a ti tlem hle.
A chiang zawk
|
PARAMETER a ni |
HLAWM KHAT |
HMD130M7-S a ni |
|||
|
international size rating a ni |
-- |
445/130 |
|||
|
INJECTION UNIT THIL THAWN THIN THIL THAWN THIN |
|||||
|
Injection volume(theoretical) a ni tih a hriat theih. |
cm3 a ni |
193 |
215 |
263 |
316 |
|
Injection rit zawng(PS) 1.1. |
g |
176 |
196 |
239 |
287 |
|
oz |
6.2 |
6.9 |
8.4 |
10.1 |
|
|
Injection rate a ni |
g/s |
92 |
103 |
126 |
151 |
|
Screw diameter a ni |
mm |
36 |
38 |
42 |
46 |
|
Injection pressure a pe a |
MPa |
230 |
207 |
169 |
141 |
|
Screw L/D ratio a ni |
-- |
23.5:1 |
22:1 |
20:1 |
18:1 |
|
Screw hmanga stroke a ni |
mm |
190 |
|||
|
Screw chakna(stepless) a ni. |
r/min a ni |
0~259 |
|||
|
CLAMPING UNIT AH KAN LO AWM VE ANG |
|||||
|
Clamping chakna a ni |
kN |
1300 |
|||
|
Mould Opening stroke a ni |
mm |
360 |
|||
|
Platen size a ni |
mm×mm a ni |
600×600 |
|||
|
Tie bar inkar hmun a awm |
mm×mm a ni |
410×410 |
|||
|
Max.ni eng |
mm |
790 |
|||
|
Mold thuk zawng(Min-Max) |
mm |
145~430 |
|||
|
Hydraulic hmanga chhuahna stroke |
mm |
125 |
|||
|
Hydraulic hmanga chhuahna chakna |
kN |
42 |
|||
|
POWER UNIT a ni |
|||||
|
Hydraulic system hmanga siam chhuah a ni |
MPa |
17.5 |
|||
|
Pump motor chakna a ni |
kW |
19.1 |
|||
|
Heater chakna a ni |
kW |
9.8 |
|||
|
Temp control zone awm zat |
-- |
5 |
|||
|
MI DANGTE |
|||||
|
Oil tank a awm theihna tur a ni |
L |
155 |
|||
|
Machine lian leh te(L×W×H) . |
m×m×m |
4.41×1.26×2.0 |
|||
Platen Dimension a ni
hot tags .: hydraulic plastic molding machine, China hydraulic plastic molding machine siamtu, supplier, factory
