Platen pahnih injection hmanga siamna hmanrua

Kimchang

Unit pum pui injection unit design,double cylinder nozzle movement,injection performance nghet tak.

Bithliahna

Platen pahnih injection hmanga siam a ni

Share to

THIL AWM DAN THIL AWM DAN

PARAMETER a ni	HLAWM KHAT	DU650II a ni
international size rating a ni	--	5312/650
INJECTION UNIT THIL THAWN THIN THIL THAWN THIN		A	B	C	D
Injection volume(theoretical) atanga lak chhuah a ni.	cm3 a ni	2554	2863	3190	2896
Injection rit zawng(PS) 1.1.	g	2324	2605	2903	3546
Injection rit zawng(PS) 1.1.	oz	82	91.9	102.4	125.1
Injection rate a ni	g/s	627	702	783	956
Screw diameter a ni	mm	85	90	95	105
Injection pressure a pe a	MPa	208	185	166	136
Screw L/D ratio a ni	--	25.2:1	23.8:1	22.5:1	20.4:1
Screw hmanga stroke a ni	mm	450
Screw chakna(stepless) a ni.	r/min a ni	180
CLAMPING UNIT AH KAN LO AWM VE ANG
Clamping chakna a ni	kN	6500
Mould Opening stroke a ni	mm	1350/800
Platen size a ni	mm×mm a ni	1420×1370
Tie bar inkar hmun a awm	mm×mm a ni	1060×930
Max.ni eng	mm	1750
Mold thuk zawng(Min-Max)	mm	400-950
Hydraulic hmanga chhuahna stroke	mm	260
Hydraulic hmanga chhuahna chakna	kN	182
POWER UNIT a ni
Hydraulic system hmanga pressure siam a ni	MPa	17.5/23.5
Pump motor chakna a ni	kW	111+13
Heater chakna a ni	kW	51
Temp control zone awm zat	--	6
MI DANGTE
Oil tank a awm theihna tur a ni	L	580
Machine lian leh te(L×W×H) .	m×m×m	7.9×2.7×2.7

INJECTION THIL THAWN THIN HLAWM KHAT

INJECTION UNIT

Unit pum pui injection unit design,double cylinder nozzle movement,injection performance nghet tak.

CLAMPING UNIT AH KAN LO AWM VE ANG

CLAMPING UNIT

EUROPEAN 2 PLATEN CLAMPING UNIT,tie bar design danglam tak,independent mold adjusts leh mold locking nei,chu chuan high pressure mold close dik leh rintlak a tichiang a ni.

Toggle machine pangngai nen khaikhin chuan,machine size a te zawk,mahse tie bar distance a lian zawk,mold open stroke a lian zawk,ejector stroke a sei zawk.