Turntable control by servo motor.Injection unit pakhat cylinder structure nei leh guide linear.Injection unit frame hmun awmnaah unit te tak te emaw screw tawi emaw dah theih a ni.
Modular design,injection unit chu exchange theih a ni.Optimized control system tha tak a ni a, a chhanna leh a dikna kawngah pawh a tha hle.
THIL AWM DAN THIL AWM DAN
| PARAMETER a ni | HLAWM KHAT | HMDP160 a ni | |||
| international size rating a ni | -- | 300 | 300 | ||
| INJECTION UNIT THIL THAWN THIN THIL THAWN THIN | A | B | A | B | |
| Injection volume(theoretical) atanga lak chhuah a ni. | cm3 a ni | 93 | 108 | 124 | 141 |
| Injection rit zawng(PS) 1.1. | g | 85 | 98 | 113 | 128 |
| oz | 3 | 3.5 | 4 | 4.5 | |
| Injection rate a ni | g/s | 55 | 63 | 73 | 83 |
| Screw diameter a ni | mm | 26 | 28 | 30 | 32 |
| Injection pressure a pe a | MPa | 342 | 295 | 257 | 226 |
| Screw L/D ratio a ni | -- | 23 | 21.4 | 22.6 | 21.2 |
| Screw hmanga stroke a ni | mm | 175 | 175 | 175 | 175 |
| Screw chakna(stepless) a ni. | r/min a ni | 0-244 | |||
| CLAMPING UNIT AH KAN LO AWM VE ANG | |||||
| Clamping chakna a ni | kN | 1600 | |||
| Mould Opening stroke a ni | mm | 340 | |||
| Platen size a ni | mm×mm a ni | 960×680 | |||
| Rotary table diameter a ni | mm | 800 | |||
| Tie bar(H×V) inkar dist. | mm×mm a ni | 710×440 | |||
| Max.ni eng | mm | 800 | |||
| Mold thuk zawng(Min-Max) | mm | 160-460 | |||
| Ejector stroke a ni | mm | 140 | |||
| Ejector tonnage a ni | kN | 38×2 | |||
| Barrel center inkar hlat zawng | mm | 420 | |||
| POWER UNIT a ni | |||||
| Hydraulic system hmanga pressure siam a ni | MPa | 17.5 | |||
| Pump motor chakna a ni | kW | 18.7 | |||
| Heater chakna a ni | kW | 6.8 | |||
| Temp control zone awm zat | -- | 4×2 | |||
| MI DANGTE | |||||
| Oil tank a awm theihna tur a ni | L | 330 | |||
| Machine lian leh te(L×W×H) . | m×m×m | 5.2×1.76×2.1 | |||
| Machine rit zawng | Ton | 7.1 | |||
INJECTION UNIT THIL THAWN THIN THIL THAWN THIN
Injection unit chu barrel set hnih hran,injection on fly,double color with one shot products,cycle time tihtlem nan.Single cylinder of injection structure, injection atan a dik zawk.
Injection unit supporter pum pui, double precise linear guard,precise leh fast speed starter nei.
Injection unit hi size hrang hrang a ni thei,double color product hrang hrang nen a inmil thei.
Barrel ah hian PID temperature control a awm bawk.
HYDRAULIC UNIT a awm bawk
Hydraulic circuit hian top brands valve leh hose an hmang a.
DIN standard cone sealing ring joint nei,manifold G thread sealing gland nei.Self-sealing magnetic oilfilter enkawlna atana awlsam.
CONTROL SYSTEM THIL AWM DAN
High-performance KEBA controller,LCD display lian tak leh man-machine friendly interface hmanga thuam a ni.Light alarm pathum buzzer nen thuam a ni.
hot tags .: double color injection molding machine, China pahnih rawng injection molding machine siamtu, supplier, factory
