Two layer with different material product,a thlak tur vawi hnih process.
Gradient effect thleng tur chuan a rualin injection emaw interval injection emaw a ni.
Adapt to also single color product,mutil-diversity function leh service pe turin.
Screw leh barrel design tha zawk,plasticizing theihna leh performance tha zawk nen.
Injection unit-a stage hnih guide line siam dan.
| PARAMETER a ni | HLAWM KHAT | HMD170-DM2 a ni | HMD218-DM2 a ni | ||
| international size rating a ni | -- | 282/90 | 587/170 | 445/130 | 873/218 |
| INJECTION UNIT THIL THAWN THIN THIL THAWN THIN | A | B | A | B | |
| Injection volume(theoretical) atanga lak chhuah a ni. | cm3 a ni | 129 | 276 | 215 | 471 |
| Injection rit zawng(PS) 1.1. | g | 117 | 252 | 196 | 423 |
| oz | 4.1 | 8.9 | 6.9 | 15.1 | |
| Injection rate a ni | g/s | 98 | 140 | 113 | 192 |
| Screw diameter a ni | mm | 32 | 42 | 38 | 50 |
| Injection pressure a pe a | MPa | 219 | 202 | 207 | 186 |
| Screw L/D ratio a ni | -- | 22:1 | 21.8:1 | 22:01 | 22.2:1 |
| Screw hmanga stroke a ni | mm | 160 | 200 | 190 | 240 |
| Screw chakna(stepless) a ni. | r/min a ni | 0-300 | 0-243 | 0-259 | 0-240 |
| CLAMPING UNIT AH KAN LO AWM VE ANG | |||||
| Clamping chakna a ni | kN | 1700 | 2180 | ||
| Mould Opening stroke a ni | mm | 450 | 510 | ||
| Platen size a ni | mm×mm a ni | 710×690 | 780×780 | ||
| Tie bar(H×V) inkar dist. | mm×mm a ni | 480×460 | 530×530 | ||
| Max.ni eng | mm | 970 | 1060 | ||
| Mold thuk zawng(Min-Max) | mm | 180-520 | 200-550 | ||
| Ejector stroke a ni | mm | 140 | 140 | ||
| Ejector tonnage a ni | kN | 50 | 50 | ||
| POWER UNIT a ni | |||||
| Hydraulic system hmanga pressure siam a ni | MPa | 16 | 17.5 | ||
| Pump motor chakna a ni | kW | 18.7 | 23 | 17.5 | 17.5 |
| Heater chakna a ni | kW | 8.5 | 17.7 | 18.3 | 31.3 |
| Temp control zone awm zat | -- | 3 | 5 | 9.6 | 22.6 |
| MI DANGTE | |||||
| Oil tank a awm theihna tur a ni | L | 260 | 530 | ||
| Machine lian leh te(L×W×H) . | m×m×m | 4.9×2.2×2.1 | 5.5×2.1×2.1 | ||
| Machine rit zawng | Ton | 6.8 | 8.9 | ||
hot tags .: hybrid injection molding machine, China hybrid injection molding machine siamtu, supplier, factory-ah chuan a chhuak leh ta a ni
