Center reinforced platen design,paint bucket ang chi center strength sang tak mamawh mold tan a tha.Clamping unit chu a nghet zawkin a rang zawk a, rigidity tha tak a nei a, tie bar dam chhung rei tak a nei bawk.
Special design screw hian plasticizing leh charging capacity a ti tha a,production period a ti tawi bawk. High-speed charging motor hian charging speed a tisang a.
Adopt double increased servo motor system,standard with eject on fly,a siam chhuah efficiency tihsan nan.(HMD430M8-SII tih loh chu)
Tui lumna distributor chu 15+1φ12 quick plug hmanga thuam a ni. Infrared heating band hmangin adopt rawh,heat preservation effect tha tak,heating band pangngai aiin 30%energy saving.
Paint Bucket hmanga chinfel dan tur
| PARAMETER a ni | HLAWM KHAT | HMD430M8-SII hmanga siam a ni | HMD500M8-SII hmanga siam a ni |
| international size rating a ni | -- | 2859/430 | 3165/500 |
| INJECTION UNIT THIL THAWN THIN THIL THAWN THIN | |||
| Injection volume(theoretical) atanga lak chhuah a ni. | cm3 a ni | 1809 | 2042 |
| Injection rit zawng(PS) 1.1. | g | 1646 | 1858 |
| oz | 58.1 | 65.6 | |
| Injection rate a ni | g/s | 591 | 680 |
| Screw diameter a ni | mm | 80 | 85 |
| Injection pressure a pe a | MPa | 158 | 155 |
| Screw L/D ratio a ni | -- | 22.5:1 | 22.7:1 |
| Screw hmanga stroke a ni | mm | 360 | |
| Screw chakna(stepless) a ni. | r/min a ni | 0-173 | 0-165 |
| CLAMPING UNIT AH KAN LO AWM VE ANG | |||
| Clamping chakna a ni | kN | 4300 | 5000 |
| Mould Opening stroke a ni | mm | 730 | 810 |
| Platen size a ni | mm×mm a ni | 1032×1042 | 1128×1168 |
| Tie bar(H×V) inkar dist. | mm×mm a ni | 760×730 | 830×830 |
| Max.ni eng | mm | 1460 | 1630 |
| Mold thuk zawng(Min-Max) | mm | 250-730 | 300-820 |
| Ejector stroke a ni | mm | 185 | 210 |
| Ejector tonnage a ni | kN | 111 | 111 |
| POWER UNIT a ni | |||
| Hydraulic system hmanga pressure siam a ni | MPa | 17.5 | 17.5 |
| Pump motor chakna a ni | kW | 72 | 48+31 |
| Heater chakna a ni | kW | 47.8 | 51.6 |
| Temp control zone awm zat | -- | 6 | 6 |
| MI DANGTE | |||
| Oil tank a awm theihna tur a ni | L | 500 | 590 |
| Machine lian leh te(L×W×H) . | m×m×m | 8.0×2.0×2.6 | 8.3×2.1×2.6 |
| Machine rit zawng | Ton | 18 | 22 |
hot tags .: bucket injection molding machine, China bucket injection molding machine siamtu, supplier, factory
