Clamping Unit a awm bawk

European 2 platen clamping unit,tie bar design danglam bik,independent mold adjusts leh mold locking nei,chu chuan high pressure mold close dik leh rintlak a tichiang a ni.

Toggle machine pangngai nen khaikhin chuan,machine size a te zawk,mahse tie bar distance a lian zawk, mold open stroke a lian zawk,ejector stroke a sei zawk.

Movable platen slide chu sei rawh,deep cavity mould atan a tha zawk,machine chu a nghet reng theih nan.

Injection Unit a awm bawk

Unit pum khat injection unit design,screw leh barrel tan design bik,plasticiz- ing chak zawk,color mixing tha zawk,leh charge hun tlem zawk neih theih nan.

Electric motor charge function atan optional,pneumatic shut-off nozzle nen,fly-a charge tur function chu a thleng thei.

Hydraulic Unit hmanga siam a ni

Sync servo motor hian efficiency response leh capacity a tichak a, energy save-ah pawh performance tha tak a pe bawk.

Electric Unit a awm bawk

High pressure clamp hawnna function,deep cavity mold tan a tha zawk chuan opening mold force lian tak a mamawh.

Standard core on fly function,cycle hun tawi zawk nan.

Turnkey hmanga chinfel dan

HMD DU SERIES a awm a
Entawn tlak	Khawl	Clamping chakna a ni	Shot rit zawng a ni	Mould thickness a ni	Stoke hawn a ni	Space inkar ties bars a ni
Entawn tlak	Khawl	T	g	mm	mm	mm×mm a ni
50L bucket a ni	HMD 1080DU a ni	1080	4723	480-1200	2070/1350	1260×1120
60L bucket a ni	HMD1080DU a ni	1080	4723	480-1200	2070/1350	1260×1120
100L bucket a ni	HMD1200DU a ni	1200	5657	600-1280	2110/1430	1320×1200
120L bucket a ni	HMD1600-1850DU a ni	1600	9391	650-1600	2750/1800	1620×1460
240L bucket a ni	HMD1850-2100DU a ni	1850	14637	700-1650	2750/1800	1720×1560
240L bucket a ni	HMD2100DU a ni	2100	14637	700-1900	3300/2100	1820×1620

HMD M8S SERIES a awm a
Entawn tlak	Khawl	Clamping chakna a ni	Shot rit zawng a ni	Mould thickness a ni	Stoke hawn a ni	Space inkar ties bars a ni
Entawn tlak	Khawl	T	g	mm	mm	mm×mm a ni
50L a ni	HMD320M8S a ni	320	1042	250-670	640	680×660
60L a ni	HMD320M8S a ni	320	1042	250-670	640	680×660
100L a ni	HMD400M8S a ni	400	1646	250-730	710	730×710
120L a ni	HMD500M8S a ni	500	1858	300-820	780	830×830
240L a ni	HMD680M8S a ni	680	2837	350-910	920	930×930

A chiang zawk

PARAMETER a ni	HLAWM KHAT	HMD1080DU a ni	HMD1200DU a ni
international size rating a ni	--
INJECTION UNIT THIL THAWN THIN THIL THAWN THIN
Injection volume(theoretical) atanga lak chhuah a ni.	cm3 a ni	5190	6218
Injection rit zawng(PS) 1.1.	g	4723	5657
Injection rit zawng(PS) 1.1.	oz	166.6	213
Injection rate a ni	g/s	1138	1096
Screw diameter a ni	mm	115	120
Injection pressure a pe a	MPa	153	159
Screw L/D ratio a ni	--	21:1	21:1
Screw hmanga stroke a ni	mm	500	550
Screw chakna(stepless) a ni.	r/min a ni	0~133	0~109
CLAMPING UNIT AH KAN LO AWM VE ANG
Clamping chakna a ni	kN	10800	12000
Mould Opening stroke a ni	mm	2070/1350	2110/1430
Platen size a ni	mm×mm a ni	1800×1660	1880×1760
Tie bar inkar hmun a awm	mm×mm a ni	1260×1120	1320×1200
Max.ni eng	mm	2550	2710
Mold thuk zawng(Min-Max)	mm	480-1200	600-1280
Hydraulic hmanga chhuahna stroke	mm	330	330
Hydraulic hmanga chhuahna chakna	kN	230	230
POWER UNIT a ni
Hydraulic system hmanga pressure siam a ni	MPa	17.5/21	16/17.5
Pump motor chakna a ni	kW	62+62+13	60+60+48+17
Heater chakna a ni	kW	65.9	75
Temp control zone awm zat	--	7	7
MI DANGTE
Oil tank a awm theihna tur a ni	L	1300	1800
Machine lian leh te(L×W×H) .	m×m×m	10.5×3.6×3.5	11.8×3.7×3.32
Machine rit zawng	kg	50000	60000