THIL AWM DAN THIL AWM DAN
| PARAMETER a ni | HLAWM KHAT | HMD130M8-IIP hmanga siam a ni | |||
| international size rating a ni | -- | 445/130 | |||
| INJECTION UNIT THIL THAWN THIN THIL THAWN THIN | A | B | C | D | |
| Injection volume(theoretical) atanga lak chhuah a ni. | cm3 a ni | 193 | 215 | 263 | 316 |
| Injection rit zawng(PS) 1.1. | g | 176 | 196 | 239 | 287 |
| oz | 6.2 | 6.9 | 8.4 | 10.1 | |
| Injection rate a ni | g/s | 160 | 178 | 217 | 261 |
| Screw diameter a ni | mm | 36 | 38 | 42 | 46 |
| Injection pressure a pe a | MPa | 230 | 207 | 169 | 141 |
| Screw L/D ratio a ni | -- | 23.5:1 | 22:1 | 20:1 | 18:1 |
| Screw hmanga stroke a ni | mm | 190 | |||
| Screw chakna(stepless) a ni. | r/min a ni | 0-300 | |||
| CLAMPING UNIT AH KAN LO AWM VE ANG | |||||
| Clamping chakna a ni | kN | 1300 | |||
| Mould Opening stroke a ni | mm | 380 | |||
| Platen size a ni | mm×mm a ni | 630×610 | |||
| Tie bar(H×V) inkar dist. | mm×mm a ni | 425×405 | |||
| Max.ni eng | mm | 840 | |||
| Mold thuk zawng(Min-Max) | mm | 150-460 | |||
| Ejector stroke a ni | mm | 125 | |||
| Ejector tonnage a ni | kN | 42 | |||
| POWER UNIT a ni | |||||
| Hydraulic system hmanga pressure siam a ni | MPa | 17.5 | |||
| Pump motor chakna a ni | kW | 31.3 | |||
| Heater chakna a ni | kW | 11 | |||
| Temp control zone awm zat | -- | 4 | |||
| MI DANGTE | |||||
| Oil tank a awm theihna tur a ni | L | 135 | |||
| Machine lian leh te(L×W×H) . | m×m×m | 4.5×1.4×1.9 | |||
| Machine rit zawng | Ton | 4 | |||
INJECTION UNIT THIL THAWN THIN THIL THAWN THIN
Speed sang tak injection a ni
Hydraulic controlsystem tihchangtlun,injection speed nasa taka tihpun chu circle time ti tawi,a bik takin thin-wall products tan.
Frication hniam tak design a ni
Injection unit hian linearguide an hmang a,injection laiin friction tih tlem leh speed tihsan nan.
Double injection cylinder rod hmanga siam a ni
Injection cylinder atan bi-direction piston rod siamrem, oilseal dam rei zawk,injection stable zawk.
Screw&Barrel hmanga siam a ni
Standard leh infrared heating bands,plasticizing capacity tihpun.
CLAMPING UNIT AH KAN LO AWM VE ANG
Ti chak rawh platen a ni
Platen siam that, rigidity structure sang tak nei,a bik takin thin-wall products tan a tha.
Tie bar a ni
Ally metallic tie bar hmanga thuam a ni a, a dam rei theih nan chakna tihpun a ni.
HYDRAULIC UNIT a awm bawk
Hydraulic system hmanga siam a ni
Hydraulic control system tihpun,machine chak zawk leh efficiency tipung,production cycle time ti tawi.Standard with clamping proportional valve,fast response leh precision control.
Hydraulic hmanga siam a ni motor hmanga siam a ni
Hydraulic motor chak-speed sang tak nei.
ELECTRIC UNIT a awm bawk
Controller a ni
Adapt Italy INOVA computer,10inch color LED screen hmangin,a precision leh fast reaction chu hrethiam rawh.
Electric hmanga thil siam a ni
Contractor leh switch limited te chuan Omron leh Schneider te chu an adapt a.
hot tags .: medical plastic molding, China damdawi lam plastic molding siamtu, supplier, factory
